|
Industry News |
| Different galvanized methods for metal packing tape influences |
Published:2017-5-23 |
Clicks:3700 |
Metal packing belt, also known as galvanized packing belt, today for everyone to simply introduce a variety of different ways to galvanize the impact of the package belt.
1. Hot-dip galvanized packing tape is produced by hot-dip galvanizing line. It is continuous annealing and continuous hot-dip zinc solution. The steel plate is heated and cooled in short time, so its stamping performance is worse than that of cold-rolling plate.
2. Electro-galvanized packing tape has the same stamping process performance as the cold-rolled original plate because it is not affected by the temperature such as heating and cooling in the electroplating process. Its galvanized layer, did not produce fragile iron - zinc alloy layer, galvanized layer of good ductility, but because of its surface pores, low strength, easy to scratch, vulnerable to dry paint and other pollution. |
| What should you pay attention to when packing the belt? |
Published:2017-5-23 |
Clicks:3765 |
Today for everyone to introduce the use of packaged with a brief note, I hope to help everyone.
1, according to the width of the roll to adjust the identity of the reel baffle, so that the pipe processing, straight seam steel pipe, seamless steel pipe roll width can not be too large can not be too small, too large in the unwinding volume is easy, So that when the double cylinder is easy to stuck. Pipe plus packing steel belt, straight seam steel pipe, seamless steel pipe as usual to the width of the reel is about 1.5 times with a roll width Yin good;
2, in the straight seam steel pipe roll on the reel should be wrapped with a baffle;
3, straight seam steel tube with the volume of the circle should be hanging on the reel;
4, adjust the drum brake shoe, can not be too loose. Bending steel pipe processing, straight seam steel pipe, seamless steel pipe can not afford to brake ceramic dyeing, when the straight seam steel pipe after the demolition of high speed abruptly or stop, likely to cause scattered volume. |
| The reason and solution of the burr in the packing belt |
Published:2017-5-23 |
Clicks:3808 |
Some low-quality package with us in the use of time if there is no wearing gloves will be stabbed hands of the situation, which is caused by the burr on the package. So how did the burrs on the bag bring? How to solve it?
1, the oven temperature is too high, which is the reason for this phenomenon, when the oven temperature is too high, there will be a packet burr phenomenon, this time we should properly adjust the oven temperature.
2, stretching blocked, in the process of stretching because of other factors lead to tensile resistance, is the packet belt appears another reason for burrs, this time we have to adjust the degree of tension to prevent the occurrence of burr.
3, the tensile temperature is too low, when the temperature is too low, prone to burr, this time we have to adjust the temperature of the packing belt. |
| The common type of packing tape |
Published:2017-5-23 |
Clicks:3832 |
Packing belt because of its excellent characteristics, by the majority of customers of the favor and recognition, the following Xiaobian to talk about the common type of packing belt, as follows:
1, semi-automatic packing belt
Features:
Made of polypropylene recycled materials, non-core material, does not contain any other lime and other heavy impurities. More suitable for semi-automatic balers without bow brackets.
product advantages:
1. The raw material has been improved, the elasticity is better, the baler wear less
2. Both sides of the edge after processing, manufacturing wire edge lines to increase the friction and tightness of the binding
3. The product specifications and colors can be customized according to customer requirements
2, transparent packing belt
Features:
Raw materials are completely new pure polypropylene materials (no renewable materials). Product mechanical properties more stable, uniform weight per meter, tape width and belt thickness stability, product skewness of not more than 15mm / m; overall use of improved performance.
product advantages:
1. The error is small, the width error is not more than 0.3mm, the thickness error is not more than 0.05mm
2. Adhesive effect is good, due to the use of pure material, said to more easily heat together
3. Pack with a beautiful appearance, transparent, pleasing to the eye. Effectively improve the packaging grade. |
| The decisive factor in analyzing the quality of packing tape |
Published:2017-5-23 |
Clicks:3488 |
Packaged with everyone unfamiliar, packaged with the industry, from the beginning of the rope began to twist into the package, and now environmentally friendly transparent packing belt. This industry has experienced more than 30 years of development. The packaging on the market with all kinds of various, the following Xiaobian to share with you about the quality of the package with what decision?
To know the quality of the package with good or bad, depends on the packing belt of polypropylene high purity is not high, the current market with a wide range of packing: pure polypropylene, polypropylene, plus masterbatch, polypropylene and renewable materials, poly Propylene plus recycled material and masterbatch.
Pure polypropylene production of the packaging with a fully transparent state, polypropylene and masterbatch production of packaged areas for the translucent state, polypropylene and renewable materials to produce the packaging belt is basically opaque, polypropylene plus masterbatch and renewable materials production of the packing belt Completely opaque
There is also a fully recycled materials and calcium carbonate powder core material production of the packing belt, fully renewable materials produced by the packaging belt is relatively soft, sandwich material only the surface of the raw material, the rest are calcium carbonate powder (also known as lime powder ). |
| What is the quality of the packing belt |
Published:2017-5-23 |
Clicks:3552 |
We buy the packing belt, not only to see his price, but also to see his quality, only the quality of clearance will consider his price. What factors can affect the quality of the packing belt? Today for everyone to introduce a brief.
1, packaged with the raw materials. Whether it is packaged belt Ye Hao, any other things Ye Hao, if the raw material is not good, then the production of the product is relatively poor. If the packing belt with more impurities, the density and adhesion is relatively poor.
2, packaged with the production process. The production process of the packing belt is also an important factor in determining the quality of the packing belt. If the production process is backward and the equipment is poor, the produced packing belt will cause uneven thickness, uneven width and unevenness, and the reasons will cause packing With poor quality.
3, long storage. If the packing tape is stored for a long time, especially in a humid environment, it will make the packing belt become brittle. |
| The advantages of metal packing belt |
Published:2017-5-23 |
Clicks:3151 |
Packing with different specifications, quality and quality, then share the advantages of metal packing belt:
1. Selection of superior quality steel, Rally strong;
2. Metal packing tape with uniform material;
3. Simple operation, packaging effort, anyone can operate;
4. with the edge of Leng Leng, with smooth edges without burrs, not hand
5. Iron packing with spit oil, not rusty. |
| How to identify the quality of the package belt |
Published:2017-5-23 |
Clicks:3248 |
Packing belt quality is good or bad, depends on the packing belt of polypropylene purity is not high, the current market with a wide range of packing: pure polypropylene, polypropylene plus masterbatch, polypropylene and renewable materials, polypropylene and renewable materials And masterbatch. Pure polypropylene production of the packaging with a fully transparent state, polypropylene and masterbatch production of packaged areas for the translucent state, polypropylene and renewable materials to produce the packaging belt is basically opaque, polypropylene plus masterbatch and renewable materials production of the packing belt Completely opaque There is also a fully recycled materials and calcium carbonate powder core material production of the packing belt, fully renewable materials production of the packing belt is relatively soft, sandwich material only the surface of the raw material, the rest are calcium carbonate powder (lime powder). The quality of the packing tape depends entirely on the purity of the polypropylene, and the higher the purity of the polypropylene, the better the tension of the packing tape.
Packing belt with the way:
(A) hot melt lap type. It uses electric heating, mechanical high-frequency oscillation welding and ultrasonic welding and other heating methods, is the plastic surface with heat melting, the two ends of the melting surface of the lap together, under a certain pressure to maintain a certain time, to be melted surface condensation , Bonding a good way with plastic joints. The joint method is suitable for polypropylene plastic belt, because the polypropylene plastic belt with metal buckle mechanical fixed, the strength of only 50% of the base material, adhesive connection is not applicable.
B) metal button. This method is the first use of tensioner ratchet one-way work, so that the tape tension, and then placed in the joints of an iron buckle, and then clamp to iron clip two layers of tape, and iron buckle side of the teeth Of the teeth, bite the tape will not make it loose. Iron buckle is usually made of galvanized iron, the operation according to the strap model to select the appropriate specifications of the iron buckle.
C) ligation. This kind of joint is a soft plastic rope, hemp rope for the binding material, joints made into knot. This joint way is both solid and beautiful, and easy to unlock.
The packing tape is made of PP and PET blends.
The main production process: plastic grain melting --- pressure belt ---- forming ---- cooling ----- winding volume ---- packaging - packing system with polypropylene by heating, melting, pulling The basic parameters that affect the quality of the packing tape are tensile, length, curvature, elongation, and so on. In the case of the same tension and other parameters, the longer the longer the lower the cost.
Packing belt of economic benefits * with a full range of varieties and a variety of colors
* With the CIS project to promote the image
* Suitable for a variety of product packaging requirements
* Enhanced product packaging visual effects
* Quality conforms to GB12023-89 standard
* National two patents
* More speculative shape
Several commonly used packing belt:
A) steel packing belt. It is generally used to load very heavy loads into an integral part or to load the load in a train, trailer or ocean-going vessel, and is rarely used for a contracted load that is sagged or displaced after being strapped, but can be tightly strapped Of the load, and often used for rigid load strapping.
B) Nylon packing belt. Has a high continuous tension, generally used for heavy objects and can withstand high initial tension of the contracted load of the bundle, the elongation and recovery rate than the polyester or polypropylene packing belt is the most expensive plastic Packing belt.
C) Polypropylene packing tape. Is the cheapest strapping material, it is generally used for lighter load strapping, bundling and sealing cartons. Polypropylene packing tape with high elongation and recovery rate, but the continuous tension as other plastic packing belt.
D) Polyester packing tape. In the plastic packing belt has the highest strength and the highest sustained tension. Polyester packed tapes are an excellent tying material for rigid loads that require strapping tension during handling, transport and storage. It is often used in applications where high tensile strength, high continuous tension and elongation are required, and in many cases it is similar to a lightweight steel belt. |
| What are the characteristics of the package? |
Published:2017-5-23 |
Clicks:3445 |
1, the tensile strength: both strip-like tensile strength, but also to impact resistance of the ductility, but also to ensure the safety of your product transport. The following are the same as the "
2, elongation is small: elongation is only one-sixth of the polypropylene (PP) belt, can be a long time to maintain tension.
3, strong temperature: melting point of 260 degrees, 120 degrees below the use of deformation.
4, good flexibility: no steel belt edge of the sharp, safe operation, neither the injured nor damaged objects. The following are the same as the "
5, beautiful no rust: no steel belt rust pollution is tied objects of the suffering, bright color can Kam.
6, good economic benefits: 1 ton packed with the length of the equivalent of 6 tons of steel belt, the price per meter is lower than the steel belt, can reduce costs for you.
PP packing belt:
Material: Polypropylene brushed grade resin, because of its good plasticity, strong tensile strength, bending resistance, light weight, easy to use and so on. Has been widely used in various fields.
Economical semi-automatic packing belt:
◇ high strength, good toughness, soft texture
◇ non-absorbent, recyclable, smooth face
◇ wear small, variety, easy to use
Packing belt: is a new type of strap replacement belt, widely used in ceramics, cotton, aluminum, building materials, tobacco, paper.
Manual packing belt:
Manual packing belt is made of polypropylene as the main raw material, adding a variety of additives, drawn into a band, woven into a mesh, mesh into a regular hexagonal, each three overlapping stacking, closely linked, tension evenly dispersed in six directions, This structure is conducive to the vertical heavy load dispersion, network and network with a connection rope, as a whole, according to the different coal mining technology, can be divided into stratified mining and total mining and so on. Mine plastic roof net acid corrosion, easy aging, long life, to avoid the use of barbed wire easy to rust the shortcomings. |
|
